SDVC34-XLR Variable Frequency Intelligent Controller for Vibratory Feeder

Automatic Constant Feed Speed Control: Automatic output voltage adjustment in real-time to ensure constant presented speed regardless of weight change ofthe workpieces.

Automatic Frequency Adjustment: Automatic output frequency adjustment in real-time ensures the load always works at its resonant frequency.

Automatic Resonant Frequency Search: Search for and output the resonant frequency of the load. Other related parameters are also set automatically counting: Count a number of the workpieces. The controller will slow down or stop when counting up to the preset value. (available on SDVC34-XLRJ)

Rs485 Communication: All parameters of the controller can be adjusted via Rs485

Automatic switch Sensor Type Recognition: The controller can recognize and adapt to both PnP and nPn type switch sensor output.

the sync output waveform of the slave controller with a hat of the master controller to the same frequency and phase to avoid beat effect

Overvoltage Protection: if the input voltage is too high, the power supply of the controller will be shut down automatically to protect itself.

Digital Overheat Protection: if the internal temperature of the controller gets too high, the controller will stop its output to protect itself.

Overcurrent Protection: if the output current exceeds its rated value, the controller will stop its output to protect itself and the load

Restorable Short Circuit Protection: If the output of the controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. so when there is no short circuit at the output side the controller will work again after power is on.