SDVC21-LP Variable Voltage Digital Controller for Vibratory Feeder

IP Grade: IP67. The controller keeps running well in a humid, oily, and duenvironment.

Super Wide Input Operation Voltage: The input voltage value totthe controller could range from 85 to 400 AC

Automatic Voltage Regulation: The internal digital voltage regulation can reduce feed speed variation caused by mains voltage fluctuation.

Time Adjustable Soft Start: The controller will gently increase output voltage from 0 to the preset value when powered on to avoid a sudden shake. Some can be digitally preset.

Preset Speeds: 4 feed speeds can be preset, stored, and outputted by connecting external short-circuit signal

Dual Switch Sensor ON/OFF Control: 2 NPN switch sensors or PLC can be connected to turn on/off the controller.

Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller

Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.

DC Control Output: The controller can output low voltage DC power associated with the ON/OFF Control of the controller to drive a solenoid or other ext

Lightning Protection: The controller can withstand lightning strokes below

Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.

Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself 

Fuse-Short Circuit Protection: If the output of the control short-circuited, the fuse inside will be blown to protect the contract and the load

Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by too high a voltage