SDVC341-M Autotune Frequency Controller for Vibratory Feeder

Features Automatic Constant Feed Speed Control: Automatic output voltage adjustment in real-time to ensure constant preset feed speed regardless of weight change of the workpieces.

Automatic Frequency Adjustment: Automatic output frequency adjustment in real-time to make sure the load is always working at its resonance frequency.

Constant Amplitude Frequency Search: Ensure that two vibratory feeders with a small gap do not collide during the frequency search process.

PFC Booster: lt can maintain a maximum output voltage of 250V when inputting 110Vor220v Counting: Count the number of the workpieces.

The controller will slowdown or stop when count up to the preset value.RS485 Communication: Rs485 interface supports ModbusAsCll,Mo dbus RTU protocol.

Automatic Switch Sensor Type Recognition: The controller canrecognize and adapt to both PP and NPN type switch sensors.

Digital Synchronous Communication: The remote voltage.frequency, phase and other parameters ofthe controller can bedistributed through digital synchronous communication CUHBus-DSso as to realize the parameter backup and restoration of all controllers(up to 8 units) in the entire network.

Overvoltage Protection: lfinput voltage is too high, the power supply of the controller will be shutdown automatically to protect itself.

Digital Overheat Protection: lfinternaltemperature of thecontroller gets too high, the controller will stopits output to protectitself.

Overcurrent Protection: lf output current exceeds its rated value.the controller will stop its output to protect itself and the load.

Restorable Short Circuit Protection: if the output ofthe controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So whenthere is no short circuit at the output side,the controller will workapain after power on.